2 General and Network Settings
This chapter describes the tabs in the General section and the configuration of the SonicWALL
TELE3 SP Network Settings. The Network Settings include the SonicWALL IP settings, the
administrator password, and the time and date. There are three tabs other than Status in the
General section:
• Network
• Time
• Password
Network
Note: The Network Settings change to the dial-up ISP network settings when a WAN Failover
occurs on the SP.
To configure the SonicWALL Network Settings, click General, and then click the Network
tab.
Network Settings
Network Addressing Mode
The Network Addressing Mode menu determines the network address scheme of your
SonicWALL. It includes four options: Standard, NAT Enabled, NAT with DHCP Client, and
NAT with PPPoE.
Page 12 SonicWALL TELE3 SP Administrator's Guide