Add Service - SonicWALL TELE3 SP Administrator's Manual

Add Service

To add a service not listed in the Services window, click Access on the left side of the browser
window, and then click the Add Service tab.
The list on the right side of the window displays the services that are currently defined. These
services also appear in the Services window.
Two numbers appear in brackets next to each service. The first number indicates the service's
IP port number. The second number indicates the IP protocol type (6 for TCP, 17 for UDP, or
1 for ICMP).
Note: There can be multiple entries with the same name. For example, the default
configuration has two entries labeled "Name Service (DNS)" for UDP port 53 and TCP port 53.
Multiple entries with the same name are grouped together, and are treated as a single service.
Up to 128 entries are supported.
Add a Known Service
1. Select the name of the service you want to add from the Add a known service list.
2. Click Add. The new service appears in the list box on the right side of the browser window.
Note that some services add more than one entry to the list.
Note: Session Initiation Protocol (SIP) and HTTPS are also available Services.
Page 70 SonicWALL TELE3 SP Administrator's Guide