Manual Key Configuration For A Sonicwall And Vpn Client - SonicWALL TELE3 SP Administrator's Manual

Manual Key Configuration for a SonicWALL and VPN Client

To configure the SonicWALL appliance, click VPN on the left side of the browser window, and
select Enable VPN to allow the VPN connection.
1. Select Disable VPN Windows Networking (NetBIOS) broadcast. Leave the Enable
Fragmented Packet Handling unselected until the SonicWALL logs show many
fragmented packets transmitted.
2. Click the Configure tab and select Add New SA from the Security Association menu.
Then select Manual Key from the IPSec Keying Mode menu.
3. Enter a descriptive name that identifies the VPN client in the Name field, such as the
client's location or name.
4. Enter "0.0.0.0" in the IPSec Gateway Address field.
5. Define an Incoming SPI and an Outgoing SPI. The SPIs are hexadecimal
(0123456789abcedf) and can range from 3 to 8 characters in length.
Note: Each Security Association must have unique SPIs; no two Security Associations can
share the same SPIs. However, each Security Association Incoming SPI can be the same
as the Outgoing SPI
6. Select Encrypt and Authenticate (ESP DES HMAC MD5) from the Encryption
Method menu.
.
SonicWALL VPN Page 125