Sonicwall Vpn Client For Remote Access And Management - SonicWALL TELE3 SP Administrator's Manual

VPN Bandwidth Management
You can allocate bandwidth to all outbound VPN traffic. To enable VPN Bandwidth
Management, select Enable VPN Bandwidth Management, and enter the amount of bandwidth
in Kbps for VPN guaranteed bandwidth and VPN maximum bandwidth. Select VPN
bandwidth priority from the VPN bandwidth priority menu, 0 (highest) to 7 (lowest).
Note: Bandwidth management is available only on outbound VPN traffic. You cannot configure
individual Security Associations to use bandwidth management.
Current IPSec Security Associations
This section displays all of the VPN configurations in the SonicWALL appliance. If you click the
name of the security association, the security association settings are displayed. The Security
Association, Group VPN, is a default setting.

SonicWALL VPN Client for Remote Access and Management

This section covers the configuration of SonicWALL VPN, and the installation and configuration
of the VPN client software. You can create a VPN client Security Association by using Manual
Key Configuration, Group Configuration or Advanced Configuration. Group
Configuration, Manual Key Configuration, and IKE Configuration (SonicWALL to
SonicWALL) are described in this chapter. Advanced Configuration is available at the
SonicWALL Web site. Before choosing your VPN client configuration, evaluate the differences
between the three methods.
Group Configuration uses IKE (Internet Key Exchange) and requires fewer settings on the
VPN client, enabling a quicker setup. Simple configuration allows multiple clients to connect to
a single Security Association (SA), creating a group VPN tunnel. The SonicWALL only supports
one Group Configuration SA. You can use the Group VPN SA for your single VPN client.
Manual Key Configuration requires matching encryption and authentication keys. Because
Manual Key Configuration supports multiple SAs, it enables individual control over remote
users.
Simple Configuration Using Pre-shared Secret is a VPN client configuration that is
appropriate only for firmware versions 5.1.1 or below.
Advanced Configuration requires a complex setup and is therefore not recommended for
most SonicWALL administrators. Advanced Configuration instructions are available on the
Web at the following address:
<http://www.sonicwall.com/products/documentation/VPN_documentation.html>.
SonicWALL VPN Page 111