Configuring Websense Content Filter List
Configure the Websense Enterprise settings on this page.
Websense Server Status
This section displays the status of the Websense Enterprise server used for content filtering.
Settings
Server Host Name or IP Address
Enter the Server Host Name or the IP address of the Websense Enterprise server used for the
Content Filter List.
Server Port
Enter the UDP port number for the SonicWALL to "listen" for the Websense Enterprise traffic.
The default port number is 15686.
User Name
To enable reporting of users and groups defined on the Webense Enterprise server, leave this
field blank. To enable reporting by a specific user or group behind the SonicWALL, enter the
User Name configured on the Websense Enterprise Server for the user or group. If using NT-
based directories on the Websense Enterprise Server, the User Name is in this format, for
example: NTLM:\\domainname\username. If using LDAP-based directories on the Websense
Content Filtering and Blocking Page 49