Installing The Vpn Client Software - SonicWALL TELE3 SP Administrator's Manual

Note: It is important to remember the Encryption Method selected as you need to select
the same parameters in the VPN Client configuration.
7. Enter a 16 character hexadecimal encryption key in the Encryption Key field or use the
default value. This encryption key is used to configure the remote SonicWALL client's
encryption key, therefore, write it down to use when configuring the client.
8. Enter a 32 character hexadecimal authentication key in the Authentication Key field or
use the default value. Write down the key to use while configuring the client settings.
Note: Valid hexadecimal characters include 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a,b, c, d, e, and f.
1234567890abcdef is an example of a valid DES or ARCFour encryption key. If you enter
an incorrect encryption key, an error message is displayed at the bottom of the browser
window
.
9. Click Add New Network... to enter the destination network addresses. Clicking Add New
Network... automatically updates the VPN configuration and opens the VPN Destination
Network window.
10. Enter "0.0.0.0" in the Range Start, Range End, and Destination Subnet Mask for
NetBIOS broadcast fields.
11. Click Update to add the remote network and close the VPN Destination Network
window. Once the SonicWALL has been updated, a message confirming the update is
displayed at the bottom of the browser window.

Installing the VPN Client Software

1. When you register your SonicWALL VPN Upgrade at <http://www.mysonicwall.com>, a
unique VPN client serial number and link to download the SonicWALL VPN Client zip file is
displayed.
Note: SonicWALL PRO 300 lists an additional 50 serial numbers on the back of the SonicWALL
VPN Client certificate
2. Unzip the SonicWALL VPN Client zip file.
3. Double-click setup.exe and follow the VPN client setup program step-by-step instructions.
Enter the VPN client serial number when prompted.
4. Restart your computer after installing the VPN client software.
Launching the SonicWALL VPN Client
To launch the VPN client, select SonicWALL VPN Client Security Policy Editor from the
Windows Start menu, or double-click the icon in the Windows Task Bar.
Page 126 SonicWALL TELE3 SP Administrator's Guide
.