Radius; Contents - SonicWALL TELE3 SP Administrator's Manual

RADIUS

RADIUS has moved from VPN to Access because RADIUS can now provide control over user
access and not just VPN access in this firmware release.
To configure RADIUS settings, complete the following instructions.
Click the RADIUS tab.
1. Define the number of times the SonicWALL attempts to contact the RADIUS server in the
RADIUS Server Retries field. If the RADIUS server does not respond within the specified
number of retries, the connection is dropped. This field can range between 1 and 10,
however 3 RADIUS server retries is recommended.
2. Define the RADIUS Server Timeout in Seconds. The allowable range is 1-60 seconds
with a default value of 5.
RADIUS Servers
3. Specify the settings of the primary RADIUS server in the RADIUS servers section. An
optional secondary RADIUS server can be defined if a backup RADIUS server exists on the
network.
4. Enter the IP address of the RADIUS server in the IP Address field.
5. Enter the Port Number for the RADIUS server.
6. If there is a secondary RADIUS server, enter the appropriate information in the Secondary
Server section.
7. Enter the RADIUS server administrative password or "shared secret" in the Shared Secret
field. The alphanumeric Shared Secret can range from 1 to 31 characters in length. The
is case sensitive.
RADIUS Users
You can select the default privileges for all RADIUS users in this section.
• Remote Access - Enable this check box if the user accesses the SonicWALL from a remote
computer. This option is only available in Standard mode.
• Bypass Filters - Enable Bypass Filters if the user can bypass Content Filter settings.
• Access to VPNs - Enable the check box if the user can send information over VPN Security
Associations.
• Access from the VPN Client with XAUTH - Enable the check box if a VPN client is using
XAUTH for authentication.
• Limited Management Capabilities - By enabling this check box, the user has limited local
management access to the SonicWALL Management interface. The access is limited to the
following pages:
- General - Status, Network, Time
- Log - View Log, Log Settings, Log Reports
- Tools - Restart, Diagnostics minus Tech Support Report
Network Access Rules Page 83