Dhcp Server; Setup - SonicWALL TELE3 SP Administrator's Manual

9 DHCP Server

This chapter describes the configuration of the SonicWALL DHCP Server.
DHCP, Dynamic Host Configuration Protocol, is a method to distribute TCP/IP settings from a
centralized server to computers on a network.
The SonicWALL DHCP Server distributes IP addresses, gateway addresses and DNS server
addresses to the computers on your LAN. To access the SonicWALL DHCP Setup window, click
DHCP on the left side of the browser window. There are three tabs in the DHCP section:
•

Setup

• DHCP over VPN
• Status
Setup
Disable DHCP Server is the default setting in the SonicWALL.
Allow DHCP Pass Through in Standard Mode
Network administrators can have a DHCP server located outside the SonicWALL Internet
Security appliance. To enable this feature in the SonicWALL appliance, follow these steps:
1. Click DHCP on the management interface. On the Setup tab, select Disable DHCP
Server.
2. Select the Allow DHCP Pass Through check box.
Page 100 SonicWALL TELE3 SP Administrator's Guide