The Vpn Interface; Authentication Service - SonicWALL TELE3 SP Administrator's Manual

The VPN Interface

Click VPN on the SonicWALL management station interface. There are five tabs in the VPN
interface:
• Summary
• Configure
•

Authentication Service

• Local Certificates
• CA Certificates
The Summary tab has two sections: the Global IPSec Settings, and the Current IPSec
Security Associations.
Global IPSec Settings
The Global IPSec Settings section displays the Unique Firewall Identifier which defaults
to the serial number of the SonicWALL appliance. You can change the Identifier, and use it
for configuring VPN tunnels. Enable VPN must be selected to allow VPN security associations.
Disable all VPN Windows Networking (NetBIOS) broadcast is also selected. This check
box disables NetBIOS broadcasts for every Security Association configuration. Enable
Fragmented Packet Handling should be selected if the VPN log report shows the log
message "Fragmented IPSec packet dropped". Do not select it until the VPN tunnel is
established and in operation.
Page 110 SonicWALL TELE3 SP Administrator's Guide