Check Network Address Settings; Commands At Chassisos Prompt - SonicWALL SonicOSX 7 Getting Started Manual

Check Network Address Settings

At the ChassisOS prompt, enter: .
show network
CHECKING IP ADDRESS
The first three IP addresses in the above listing are for the NSsp Management port.
So from the Management port, you can connect to Blade 1, Blade 2, and SonicOSX.
The two ports support access to the two blade platforms from rear panel RJ45 interface
aux chassis IP
connectors.

Commands at ChassisOS Prompt

A list of common commands appears in response to .
?
CHASSISOS COMMANDS
SonicOSX 7 Getting Started Guide for the NSsp Series 40
CLI Bring-up