Scenario A: SRA on a New DMZ
This section provides procedures to configure your gateway
appliance based on Scenario A. This section contains the
following subsections:
•
•
•
•
1.
2.
security appliance, not the SonicWALL SRA.
Page 28
Scenario A: SRA on a New DMZ
Adding a New SRA Custom Zone
1.
Navigate to the Network > Interfaces page, click
Configure for the X2 interface (or any other available
interface).
2.
Select Create New Zone in Zone field. The 'Add Zone'
window opens.
3.
Enter SRA in the Name field.
4.
Select Public from the Security Type drop-down menu.
5.
Un-select the Allow Interface Trust checkbox.