Recording Configuration Information; Registration Information; Networking Information - SonicWALL SuperMassive 9200 Getting Started Manual

Recording Configuration
Information
Use this section to record your configuration information. Be
sure to keep it for future reference.
NOTE: The default MGMT interface IP address is
192.168.1.254.
Registration Information
Serial Number:
Authentication Code:
Record the serial number found
on the bottom panel of your
SuperMassive appliance.
Record the authentication code
found on the bottom panel of
your SuperMassive appliance.
Networking Information
LAN IP Address:
Subnet Mask:
WAN IP Address:
SonicWall SuperMassive 9200/9400/9600 Getting Started Guide
Select a static IP address for your
SuperMassive appliance that is
within the range of your local
network. (default for X0 is
192.168.168.168)
Record the subnet mask for the
local network (default mask is
255.255.255.0). Client devices
connecting through the appliance
LAN interface are assigned IP
addresses in this network (default
client addresses assigned by the
SonicOS DHCP server are on the
192.168.168.0/24 subnet).
Select a static IP address for your
Ethernet WAN interface (X1). This
setting only applies if you are
using an Internet Service Provider
(ISP) that assigns a static IP
address.
15