Ap1.3 Configuration Of The Sentence From Arpa(Far) To Ecdis(Fea.) - Furuno FAR-2107 Series Service Manual

AP 1.3 Configuration of the Sentence from ARPA(FAR) to ECDIS(FEA.)
1.3.1 OSD - Own Ship Data
$RAOSD , x.x , A , x.x , a , x.x , a , x.x , x.x , N *hh<CR><LF>
1 2
Contents
1
2
3
4
- SPEED
- COURSE 5
- HEADING
6
7
8
9
1.3.2 PAESP - Position Adjust
$PAESP , A , x.x , x.x *hh<CR><LF>
1 2 3
Contents
- POSITION ADJUST START
- POSITION ADJUST END
(RANGE, BEARING)
AP 1.3 Configuration of the Sentence from AP 1.3 Configuration of the Sentence from ARPA AP 1.3 Configuration of the Sentence from AP 1.3 Configuration of the Sentence from
3 4 5 6 7
Data
Heading, degrees true
Heading status, A= valid
Course
Course reference, B/M/W/R/P
Speed
Speed reference, B/M/W/R/P
Drift course, manually entered
Drift speed, manually entered
Speed units, N= knots
Data
1 Command, S/E
2 Range
3 Bearing
8 9
M= manually entered
W= water referenced
B= bottom tracking log
R= RADAR tracking of fixed target
P= position system ground reference
M= manually entered
W= water referenced
B= bottom tracking log
R= RADAR tracking of fixed target
P= position system ground reference
S= position adjust start
E= position adjust end
AP1-20
ARPA(FAR) to ECDIS(FEA.) ARPA ARPA (FAR) to ECDIS(FEA.) (FAR) to ECDIS(FEA.) (FAR) to ECDIS(FEA.)
Reference
Command