Rgb Buffer (External Monitor Interface) - Furuno FR-1500 MARK-3 Series Installation Manual

4.5 RGB BUFFER (External Monitor Interface)

The RGB BUFF Kit provides for connection of an external monitor, and mainly
consists of the RGB BUFF Board. Install the kit as shown below.
Table 4-5 Contents of RGB BUFF Kit OP03-153 (Code no. 008-490-820)
RGB-BUFF Board
(VIDEO INTERFACE Board)
Coach Clip
XH Connector Assy.
RGB Board Fixing Plate
Panhead Screw
1. Unfasten eight screws to remove the cover.
2. Unfasten two screws at the right side of the SPU Board. See the figure below
for location.
3. Fasten the RGB BUFF Board (supplied) to the fixing plate (supplied) with four
screws (supplied).
4. Fasten the fixing plate with RGB BUFF Board to the chassis with the screws
removed at step 2.
Name
03P9229
VJR-3
03-1988 (13-13P)
03-141-1901
M3X8 C2700W
Figure 4-17 Display unit, top view
Figure 4-18 Attachment of fixing plate
Type Qty Code No.
1 006-551-050
1 000-111-284
1 008-490-840
1 100-266-730
4 000-881-404
4-15