Transceiver Modules And Cables For Sfp And Sfp+ Fiber Ports.35 - NETGEAR GSM4248PX Hardware Installation Manual

Table 7. PoE classes and PoE power allocations (Continued)
Device Compatible PoE
Class Standard
5 PoE++
6 PoE++
7 PoE++
8 PoE++
The previous table shows the standard power ranges, calculated with the maximum
cable length of 328 feet (100 meters). If a device receives insufficient PoE power from
the switch, consider using a shorter cable.
For more information about PoE, see the installation guide and user manuals, which
you can download by visiting netgear.com/support/download.
Transceiver modules and cables for SFP and SFP+ fiber
ports
To enable high-speed fiber and Gigabit Ethernet, short- and long-distance connections
on the switch, SFP and SFP+ fiber ports can accommodate standard 1G SFP and 10G
SFP+ transceiver modules and direct attach cables (DACs), all of which are sold
separately.
The switch supports the following NETGEAR SFP and SFP+ transceiver modules and
cables:
• Short-reach fiber transceiver modules:
- AGM731F: SFP transceiver 1000BASE-SX, SFP multimode LC GBIC
- AXM761: SFP+ transceiver 10GBASE-SR, SFP+ multimode LC GBIC
• Long-reach fiber transceiver modules:
- AGM732F: SFP transceiver 1000BASE-LX, SFP single mode LC GBIC
- AXM762: SFP+ transceiver 10GBASE-LR, SFP+ single mode LC GBIC
- AXM763: SFP+ transceiver 10GBASE-LRM, SFP+ multimode LC GBIC
- AXM764: SFP+ transceiver 10GBASE-LR Lite, SFP+ single mode LC GBIC
Hardware Overview
AV Line of Fully Managed Switches M4250 Series
Class Description
Ultra high power
Ultra high power
Ultra high power
Ultra high power
Maximum Power
Reserved for the PD
45.0W
60.0W
75.0W
90.0W
35
Power Delivered to
the PD
25.5W–47.0W
51.0W–64.4W
62.0W–81.1W
71.0W–96.5W
Hardware Installation Guide