Power Cycle The Poe Ports - NETGEAR GS316EP User Manual

To managed the uninterrupted PoE feature:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. Select POE.
The Power over Ethernet (PoE) page displays.
5. Click the button to enable or disable Uninterrupted PoE.
Disabled: The button bar displays gray, and the button is positioned on the left.
Enabled: The button bar displays green, and the button is positioned on the right.

Power cycle the PoE ports

You can use the Power Cycle Ports feature to forcibly reset one or more PoE ports.
To power cycle PoE ports through the device UI:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. Select POE.
The Power over Ethernet (PoE) page displays.
5. In the Power Cycle Ports section, click the port number icon for every port that you
want to reset.
When a port is selected, the port number icon displays solid purple.
6. When all the ports that you want to power cycle are selected, click the APPLY button.
PoE on the selected ports is forcibly reset.
Maintain and Monitor the Switch
Gigabit Ethernet Plus Switches
95 User Manual