Entering Specific Symbols - Xerox ApeosPort-III C7600 User Manual

For how to register local terminal information, refer to "5 Tools" > "Fax Service Settings" > "Local
Terminal Information" in the Administrator Guide.
1
Select [Keyboard].
2
Select [Shift], and then select the buttons in
the following order: [<], [port number], [>],
[recipient's phone number]
Input example:
When using Line 1:<1>XXXXXXXXXX
3
Press the <Start> button.

Entering Specific Symbols

When specifying a recipient, you can use the following features to enter specific
symbols from the touch screen.
Feature
Enter pause
Transmit using a
password
Transmit DTMF
signal
Note • When using the DTMF method, use specific symbols. For information on the DTMF method,
Button
- or
<Pause> (-)
S
!
"Remote Folder (Using Remote Folder)" (P.181), and "Broadcast" (P.193).
Function
Use these buttons to
enter a pause.
One pause is 3 seconds.
You can enter pauses of
6 seconds, 9 seconds,
etc. by additional button
presses.
When a password has
been set, transmission
will only start if the
password matches the
ID number on the remote
terminal.
Use to transmit the
DTMF signal.
Fax/Internet Fax
Input method
Press the <Pause>
button.
(Example)
0-123 ...
0--123 ...
1. Select [New
Recipients] in the
[Fax/Internet Fax]
screen to display the
keyboard.
2. Select [S].
(Example)
0312345678S12345678
1. Select [New
Recipients] in the
[Fax/Internet Fax]
screen to display the
keyboard.
2. Select [More
Characters].
3. Select [!].
(Example)
0311123456!123#
163
4