Xerox ApeosPort-III C7600 User Manual page 197

Password
A pre-registered two-digit number
Note • By default, no password is set. For setting a password, contact our Customer Support
Relay station ID
The last two digits of the initiating station address number registered at the relay
station
Address number
An address number for the relay recipients registered at the relay station
The wildcard "∗" can also be used.
The above dialing format can be registered in an address number to send using the address number. For
information on how to register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book
Entry" in the Administrator Guide.
3
Press the <Start> button.
Manual Send (transmitting with picking up the receiver or on-hook)
1
Select the [More Options] tab to display the
[More Options] screen.
2
Select [On-hook (Manual Send/Receive)].
3
Select [Manual Send] from the drop-down
menu.
4
Use the keyboard shown in the touch screen
to enter numbers in the following format.
Note • You can specify up to 20 locations for relay recipients.
F Code Method
You can perform Relay Broadcast by registering the relay station's F code and
password (if necessary) to the machine.
Note • When performing Relay Broadcast with the F Code method, you can use a password if you
• When performing Relay Broadcast with machines of this model, we recommend using the
• Confirm the F Code (sub-address) and password of the target recipient machine which is
Center. If a password has not been set, you do not need to enter one.
set a receive password for the relay station.
fax signal method.
used as a relay station.
Broadcast
4
195