Covers (Attaching Covers To Copies) - Xerox ApeosPort-III C7600 User Manual

[Booklet Creation-Divide Output] Screen
When you have a large number of originals, the originals are divided to create subsets
to reduce the thickness of each booklet. The machine folds copies in half, and piles
them up to form a booklet. Finisher C/Finisher C w/Booklet allows you to specify the
number of sheets within the range of 1 - 50 in 1-sheet increments. D-Finisher with
Booklet Maker allows you to specify the number of sheets within the range of 1 - 100
sheets in 1-sheet increments.
Note • When specifying [Folding], set the dividing number of sheets in the range from 1 to 15.
1
Select [On].
2
Set the number of copies using [
or with the numeric keypad.
[Booklet Creation-Fold & Staple] Screen
When the Finisher C w/Booklet (optional) or D-Finisher with Booklet Maker is installed,
[Fold Only] or [Fold & Staple] becomes available.
1
Select any item.
No Fold & Staple
No Finishing is carried out.
Fold Only
Outputs copies folded in half. The number of copies that can be folded is 5. When the
number is more than 5, the document is divided by every 5 sheets.
Fold & Staple
The copies are folded in half and stapled at the center. The number of copies that can
be treated is 2 to 15.

Covers (Attaching Covers to Copies)

This feature allows you to attach covers to copies.
Different types of paper (such as colored paper and heavyweight paper) can be used
as the front and back covers of copies.
] and [ ]
Output Format
3
101