Combine Original Sets (Adding Originals) - Xerox ApeosPort-III C7600 User Manual

3 Copy
Change Quantity...
The [Change Quantity] screen appears and you can change the number of copies
entered before. Enter a new quantity using the numeric keypad. The new value must
include the number of the sample set that has already been printed. When reducing the
quantity, you cannot enter a number less than the number of copies that have already
been printed.
Note
Cancel
The remaining copies are cancelled.
Start
The remaining copies are made.
Note

Combine Original Sets (Adding Originals)

3
Use this feature when you copy a document that has too many pages to be loaded into
the document feeder at one time, or when you scan each document page using the
document glass and have the machine process the pages as one job.
[Next Original] is usually displayed while scanning documents with the document
feeder is always selected in this mode. In addition, when using the document glass to
scan documents, [Next Original] is also selected during scanning. If [Copy Output] is
set to [Auto], the output is automatically sorted.
When all documents have been scanned, select [Last Original].
Note
1
Select [Combine Original Sets].
2
Select [On].
Off
Disables this feature.
On
Enables this feature.
Original Orientation
Allows you to specify the orientation of the document to have the machine identify the
top of the document.
Note
132
• If you specify "1" for [Change Quantity] and then press the <Start> button, the machine will
not process the job.
• The same operation is performed if you press the <Start> button on the control panel.
• After the first original set is copied, the screen will automatically return to the previous
display if the machine is left unused for the period specified under [Auto Clear]. For details
on [Auto Job Release], refer to "5 Tools" > "Common Service Settings" > "Machine Clock/
Timers" > "Auto Job Release" in the Administrator Guide.
• If the [Original Orientation] differs from the actual document orientation, then the machine
may mistakenly detect the top of the document.