Xerox ApeosPort-III C7600 User Manual page 200

4 Fax
Where
Initiating
Station
For the contents to be registered to a primary relay station and a secondary relay station, refer to the
manuals of the primary and secondary relay stations.
1
Select an address number or group dial number to which a remote relay broadcast is
registered and press the <Start> button.
DTMF Method
DTMF Method has two methods: Auto Send and Manual Send.
For information on how to register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book
Entry" in the Administrator Guide.
For the contents to be registered to a primary relay station and a secondary relay station, refer to the
4
manuals of the primary and secondary relay stations.
Note
Auto Send (transmitting without picking up the receiver)
1
Select [Keyboard] to display the keyboard on the touch screen and enter in the
following format.
2
Select [+ Add] to perform Multiple Relay Broadcast.
Password
A pre-registered two-digit number
Note
Relay Station ID
The last two digits of the initiating station address number registered at the primary
relay station
Address Number
The address number for the secondary relay station registered at the primary relay
station
The above dialing format can be registered in an address number to send using the address number. For
information on how to register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book
Entry" in the Administrator Guide.
198
Assign the relay station to an address number (0001 to 2000) to set up the
Relay Broadcast feature.
Register the last two digits of the address number of the initiating station
(which is already registered at a primary relay station) as a relay station ID.
Register the address numbers or group dial number of the secondary relay
stations (which are registered at a primary relay station) as broadcast
recipients.
• DTMF-Method-compatible machines (of Fuji Xerox) are available for DTMF Method.
• By default, no password is set. For setting a password, contact our Customer Support
Center. If a password has not been set, you do not need to enter one.
Contents