Table of Contents
Advertisement
5 Scan
The following shows the reference section for each feature.
"General Scan Features" (P.238)
"Advanced Settings" (P.249)
"Layout Adjustment" (P.253)
"E-mail Options/Filing Options" (P.259)
Step 3 Starting the Scan Job
The following describes how to start a scan job.
1
Press the <Start> button.
Important • If the document has been set in the
Note
If you have more documents
5
If you have more documents to scan, select [Next Original] on the touch screen while
the current document is being scanned. This allows you to scan the documents as a
single set of data.
Up to 999 pages can be stored.
Note
2
While documents are being scanned, select
[Next Original].
Note
212
document feeder, do not hold down the
document while it is being conveyed.
• Scanning cannot be performed if a copy
protection code is detected.
• If a problem occurs, an error message
appears in the touch screen. Solve the
problem in accordance with the message.
• The next scan job can proceed while
scanning.
• If the number of document pages exceeds the maximum, then scanning stops. Follow the
displayed message, and either abort the operation, or save the scanned data.
• When using the document feeder, load the next document after the machine has finished
scanning the first document.
• When [Next Original] is displayed and no operation is performed for a certain period of time,
the machine automatically assumes that there are no more documents.
• You can change the scan settings of the next document by selecting the [Change Settings]
button that is displayed after selecting [Next Original].
1
2
3
4
5
6
7
8
9
0
#
C
<Start> button
Advertisement
Table of Contents
