Entering Characters; Entering Letters; Entering Symbols; Selecting Characters - Xerox WorkCentre Pro 16FX User Manual

Entering Characters

You can enter letters, numbers, and symbols by using the fax keypad. The keypad is shown
below.

Entering Letters

Letters are marked above each of the number keys "2" through "9." To enter a letter, press the
appropriate key repeatedly until the desired letter appears. The number of the key appears first,
followed by letters in the order marked above the key. For example, pressing the 2 key once
displays "2," twice displays "A," three times displays "B," and four times displays "C." A fifth press
of the 2 key begins the cycle again with "2."

Entering Symbols

Symbols can be entered by pressing the "#" and " " keys. The chart below shows the sequence
of symbols that will display. Press the "#" key to move forward through the sequence. Press the
" " key to move backward.
#→
. / ! " # $ % & ' ( ) * + , - : ; < = > ? @ [¥] ^ _ ` {l} → ←

Selecting Characters

When the desired letter, number or symbol is displayed, press the right arrow key to select that
character and move the cursor to the next position to the right. To move the cursor to the
previous position, press the left arrow key. Press the Enter key to complete the entry of the string
of characters.
ABC
GHI JKL
PQRS TUV
DEF
MNO
WXYZ
Fax Control Panel
←*
31