Printing Files In A Folder - Xerox ApeosPort-III C7600 User Manual

6 Send from Folder

Printing Files in a Folder

You can print selected files in a folder.
1
On the [Folder - File List] screen, select files.
2
Select [Print] or [Batch Print].
Enter the number of print sets using the
numeric keypad, if necessary.
Note
3
Select any item.
4
Click [Print].
6
Note
Print
Configure the Print settings.
Paper Supply
Allows you to select paper.
2 Sided Printing
Allows you to set 2-sided printing.
Output
Allows you to set stapling, punching, and a tray where the output is delivered.
Note
For examples of the settings of stapling and hole punching, refer to "When stapling/punching holes"
(P.273).
File Details
Displays the [File Details] screen. Select a file from the list to check its preview image.
For details on previewing a file, refer to "Checking File Details" (P.271).
Note
Print
Prints the selected file.
272
• When multiple files are selected, [Batch
Print] treats the selected files as one
single file, while [Print] deals them as
separate files.
• When a file stored by [Store in Remote
Folder] of a print driver is printed, the settings specified on the control panel or CentreWare
Internet Services will override the settings specified on the print driver except the [Multiple-
Up], [Skip Blank Page], and print position settings.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• Some models require an optional package to use this feature. For more information, contact
our Customer Support Center.