Toshiba RAV-SM563UT-E Service Manual/Integration page 186

4. Cord heater installation work procedure
No. Photo / Explanatory diagram
Remove each cabinet, inverter assembly, motor base assembly, and partition board assembly.
1
* Do not damage the electric parts such as cables, connectors, etc. while this work.
1-1
1-2
Side cabinet (L) Inverter assembly
1-3
1-4
Tel: 01823 665660
Heronhill - for all your Toshiba requirements
Upper cabinet
Valve cover
Water-proof
cover
Wiring cover
Front cabinet
Side cabinet (R)
– 186 –
www.heronhill.co.uk
Procedure
Remove the upper cabinet and the valve cover.
Related parts / Screws list
Part name
Screw type
Upper cabinet Ø4 × 8
Valve cover Ø4 × 1
Remove the front cabinet, the wiring cover and the
water-proof cover.
Related parts / Screws list
Part name
Screw type
Front cabinet Ø4 × 8
Wiring cover Ø4 × 8
Remove the side cabinet (R/L) and the inverter
assembly.
Related parts / Screws list
Part name
Screw type
Side cabinet (R) Ø4 × 8
Side cabinet (L) Ø4 × 8
Inverter assembly Ø4 × 8
Remove the inverter assembly.
No. Part name
1 TE sensor
2 TD sensor
3 TO sensor
4 TS sensor
5 4-way valve coil
6 PMV coil
7 Fan motor
(Intermediate
8 Compressor lead
Reactor (Intermediate
9
(2 pieces.)
Fax: 01823 665807
Used screw
Quantity
5
1
Used screw
Quantity
7
2
Used screw
Quantity
7
3
1
Connector Connector
No. color
CN600 White
CN601 White
CN602 White
CN603 White
CN701 Yellow
CN700 White
CN300 White
White
connector)
White
connector)