Toshiba RAV-SM563UT-E Service Manual/Integration page 150

RAV-SP1102AT-E, RAV-SP1402AT-E
No. Part name

Common
procedure
Before works, put on gloves, otherwise an
injury may be caused by parts, etc.
1. Detachment
1) Stop operation of the air conditioner, and
2) Remove the front panel.
3) Remove the power cable and the indoor/
4) Remove the roof plate.
2. Attachment
1) Mount the roof plate.
2) Connect the power cable and the indoor/
Be sure to fix the power cable and the
indoor/outdoor connecting cable with
bundling band on the market along the
inter-unit cable so that they do not come
to contact with the compressor, the valve
and the cable at gas side, and the dis-
charge pipe.
3) Attach the front panel.
Tel: 01823 665660
Heronhill - for all your Toshiba requirements
Procedure
REQUIREMENT
turn off switch of the breaker.
(ST1T Ø4 × 10, 3 pcs.)
• After removing the screws, remove the
front panel while drawing it downward.
outdoor connecting cable from cord clamp
and terminal.
(ST1T Ø4 × 10, 6 pcs.)
(ST1T Ø4 × 10, 6 pcs.)
outdoor connecting cable to terminal, and
then fix them with cord clamp.
REQUIREMENT
(ST1T Ø4 × 10, 3 pcs.)
– 150 –
www.heronhill.co.uk
Remarks
Front panel
Roof plate
Fax: 01823 665807