Toshiba RAV-SM563UT-E Service Manual/Integration page 121

No. Part name
ƒ
1. Detachment
Adjust corner
cap
2. Attachment
„
1. Detachment
Ceiling panel
NOTE :
Remove the connector by releasing
locking of the housing.
2. Attachment
NOTE :
A panel has directional property, so mount
a panel with attention to the marks.
Tel: 01823 665660
Heronhill - for all your Toshiba requirements
Procedure
1) Perform work of item 1. of
2) Remove screws at 4 corners of the
suction port. (Ø4 × 10, 4 pcs.)
3) Push the knob outward and remove the
adjust corner cap by sliding it.
1) Mount the adjust corner cap by sliding
it inward.
2) Tighten screws at 4 corners of the
suction port. (Ø4 × 10, 4 pcs.)
1) Perform works of items 1 of
ƒ
and 1 of .
2) Remove the louver connector (CN33,
White, 5P) connected to the control
P .C. board, and then remove the lead
wire from the clamp.
3) Remove screws fixing the ceiling panel.
(M5, 4 pcs.)
4) Push the tentative hook outward to
remove the ceiling panel.
1) Hang the tentative hook of the main
body drain pan to the tentative hook of
the ceiling panel.
2) Tighten fixing screws. (M5, 4 pcs.)
3) Connect louver connector of the ceiling
panel to connector (CN33, White, 5P)
on the control P.C. board.
– 121 –
www.heronhill.co.uk

.
Push outward Push outward Push outw
 ‚
, 1 of
Remove the Remove the
louver connector louver connector
Remarks
Screw Screw Scre
Fixing screw Fixing screw
Push the tentative Push the tentative
hook outward hook outward
Fax: 01823 665807