Toshiba RAV-SM563UT-E Service Manual/Integration page 127

14-1-2. Concealed Duct Type
RAV-SM562BT-E, RAV-SM802BT-E, RAV-SM1102BT-E, RAV-SM1402BT-E
Be sure to turn off the power supply or circuit breaker before disassembling work
No. Part name

Electrical parts 1. Remove the air filter.
box
2. Remove the set screws (2 positions) of
3. Remove the electrical parts cover.
4. Remove the set screws (2 positions) of
5. Remove the electrical parts box.
In this time, remove connectors of TA sensor,
TC sensor and TCJ sensor if necessary.
‚
Multi blade fan 1. Remove the air filter.
2. Remove the connector of the fan motor
3. Remove the hexagon head screw (562: 2,
4. Remove the fan assembly from main unit.
5. Remove the set screws (4 positions) of
6. Remove the fan cover.
7. Loosen the sets crew of the Multi blade
8. Pull the Multi blade fan towered fan case
Tel: 01823 665660
Heronhill - for all your Toshiba requirements
Procedure
the electrical parts cover.
the electrical parts box.
The electrical parts box is fixed to the
main unit with claws at the right side.
Lift up it once and pull toward you.
Then claws come off.
P .C. board.
802, 1102, 1402 : 3 positions) of fixing fan
assembly and main unit.
The fan assembly is fixed to the main unit
with claws (3 positions) at the upper side.
Lift up it once and pull toward rear side.
Then claws come off.
fixing fan case and fan cover.
fan using hexagon wrench.
side.
Then fans come off.
– 127 –
www.heronhill.co.uk
Remarks
Screws
(Fixing electrical parts cover and box)
Electrical parts cover
Screws
(Fixing electrical parts box and main unit)
Electrical parts box
Claw (Reverse side)
Hexagon head screws
(Fixing fan assembly and main unit)
Fixing claw (Main unit)
Fixing hole (Fan assembly)
Fan case Multi blade fan
Fan case cover
Set screw
Screws (Fixing fan case cover)
Fax: 01823 665807
1 -2
1 -3
1 -4
1 -5
2 -3
2 -4
2 -5
2 -6