Toshiba RAV-SM563UT-E Service Manual/Integration page 151

No. Part name
‚
1. Detachment
Air-outlet cabinet
1) Perform the work in 1 of
2) Take off screws for the air-outlet cabinet
3) Take off screws for the air-outlet cabinet
4) Take off screw for the air-outlet cabinet
5) Take off screws for the air-outlet cabinet
2. Attachment
1) Put the upper left side of the air-outlet
2) Attach the taken-off screws to the
ƒ
Side cabinet 1) Perform the work in 1 of
2) Take off screws fixing the inverter and
3) Take off screws for the side cabinet and
4) Take off screw for the side cabinet and
5) Take off screw for the side cabinet and
6) Take off screws for the side cabinet and
Tel: 01823 665660
Heronhill - for all your Toshiba requirements
Procedure

and the partition plate.
(ST1T Ø4 × 10, 3 pcs.)
and the base plate.
(ST1T Ø4 × 10, 2 pcs.)
and the heat exchanger.
(ST1T Ø4 × 10, 1 pc.)
and the fin guard.
(ST1T Ø4 × 10, 2 pcs.)
cabinet on the end plate of heat ex-
changer, and fix it with screw.
(ST1T Ø4 × 10, 1 pc.)
original positions.

the side cabinet.
(ST1T Ø4 × 10, 2 pcs.)
the valve fixed plate.
(ST1T Ø4 × 10, 2 pcs.)
the piping panel (Rear).
(ST1T Ø4 × 10, 1 pc.)
the base plate.
(ST1T Ø4 × 10, 1 pc.)
the fin guard.
(ST1T Ø4 × 10, 4 pcs.)
– 151 –
www.heronhill.co.uk
Heat exchanger
.
Upper side of the end Upper side of the end
plate of heat exchanger plate of heat exchanger
. Inverter
Valve fixed plate
Remarks
Air-outlet cabinet
Finguard Finguard
Air-outlet cabinet
Side cabinet
Side cabinet
Fax: 01823 665807