Toshiba RAV-SM563UT-E Service Manual/Integration page 140

No. Part name
‰
1. Detachment
Pulse Modulating
Valve (P.M.V.) coil
1) Perform works of items
2) Release the coil from the concavity by
2. Attachment
1) Put the coil deep into the bottom
2) Fix the coil firmly by turning it to the
Š
Fan guard 1. Detachment
1) Perform works of items 1 of
2) Remove the front cabinet, and put it
3) Remove the hooking claws by pushing
2. Attachment
1) Insert claws of the fan guard in the hole
Tel: 01823 665660
Heronhill - for all your Toshiba requirements
Procedure
turning it, and remove coil from the
P .M.V.
position.
concavity.
down so that fan guard side directs
downward.
CAUTION
Perform works on a corrugated card-
board, cloth, etc. to prevent flaw on the
product.
with minus screwdriver along with the
arrow mark in the right figure, and
remove the fan guard.
of the front cabinet. Push the hooking
claws (10 positions) with hands and
then fix the claws.
CAUTION
All the attaching works have completed.
Check that all the hooking claws are
fixed to the specified positions.
– 140 –
www.heronhill.co.uk
 ‚
and .
PMV body
PMV coil
 ‚
, and .
Hooking claw
Remarks
Positioning extrusion
Concavity
Minus screwdriver
Front cabinet
Front cabinet
Fan guard
Fax: 01823 665807