Toshiba RAV-SM563UT-E Service Manual/Integration page 130

14-1-3. Under Ceiling Type
RAV-SM562CT-E, RAV-SM802CT-E, RAV-SM1102CT-E, RAV-SM1402CT-E
Be sure to turn off the power supply or circuit breaker before disassembling work
No. Part name

Suction grille 1. Slide the suction grille fixing
knobs (2 positions) toward the
arrow direction of left figure, and
open the suction grille.
2. Under the condition of the
suction grille opened, push the
hook section of hinges (2 posi-
tions) at the rear side, and then
pull out the suction grille.
‚
Side panel 1. Open the suction grille.
2. After removing the side panel
screws (2 positions), slide the
side panel forward and then
remove it.
ƒ
Electrical 1. Remove the suction grille.
parts box
2. Loosen the set screws (2 posi-
tions) of the electrical parts
cover.
3. Remove the electrical parts
cover.
4. Remove the set screws
(2 positions) of the electrical
parts box.
5. Remove the electrical parts box.
In this time, remove connectors of
TA sensor, TC sensor and TCJ
sensor if necessary.
Tel: 01823 665660
Heronhill - for all your Toshiba requirements
Procedure
– 130 –
www.heronhill.co.uk
Remarks
Pull out suction grille
while pushing hook.
Hinge
Suction grille
Suction grille
fixing knob
Protector
Side panel
Slide forward.
Electrical parts cover
Screws
(Fixing electrical parts cover and box)
Electrical parts box Electrical par Electr ical parts bo
Screws
(Fixing electrical parts box and main unit)
Fax: 01823 665807
Level flap
3 -2
3 -3
3 -4
3 -5
ts box