Toshiba RAV-SM563UT-E Service Manual/Integration page 131

No. Part name
„
Multi blade fan 1. Remove the suction grille.
motor
2. Remove the connector of the fan
3. (SM802, SM1102, SM1402CT-E
4. Push the fan cover fixing hooks
5. (SM1102, SM1402CT-E only)
6. Remove the hexagon head screw of
7. Loosen the sets crew of the multi
8. Pull the multi blade fan towered fan
Tel: 01823 665660
Heronhill - for all your Toshiba requirements
Procedure
motor from P .C. board.
only)
Remove the set screw (1 position)
to fixing and reinforcing bar.
(Slide the reinforcing bar toward
arrow side on the left figure.)
(2 positions) forward fan cover side
and remove the fan cover.
Remove the hexagon head screws
(2 positions) to fix bearing and the
bearing.
fixing fan motor and fan motor
holder then the assembly removed
from the main unit.
blade fan using hexagon wrench.
case side. Then fans come off.
– 131 –
www.heronhill.co.uk
Remarks
Screws
(Fixing reinforcing bar and main unit)
Reinforcing bar
Fan cover fixing hook Fan cover (Lower side)
Bearing Bearing
Hexagon head screws
(Fixing bearing and main unit)
Fan motor holder
Hexagon screws
(Fixing fan motor and main unit)
Set screw of multi blade fan
Fax: 01823 665807
4 -3
4 -4
4 -5
Fan motor Fan motor
4 -6
4 -7
Multi blade fan