Table 6-9 Radius - ZyXEL Communications Prestige 660W Series User Manual

The following table describes the fields in this screen.
LABEL
Authentication Server
Active
Server IP Address
Port Number
Shared Secret
Accounting Server
Active
Server IP Address
Port Number
Shared Secret
Back
Apply
Cancel
Wireless LAN Setup

Table 6-9 RADIUS

Select Yes from the drop-down list box to enable user authentication through an
external authentication server.
Enter the IP address of the external authentication server in dotted decimal
notation.
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs you
to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external authentication server and the access points.
The key is not sent over the network. This key must be the same on the external
authentication server and Prestige.
Select Yes from the drop-down list box to enable user authentication through an
external accounting server.
Enter the IP address of the external accounting server in dotted decimal notation.
The default port of the RADIUS server for accounting is 1813.
You need not change this value unless your network administrator instructs you
to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external accounting server and the access points.
The key is not sent over the network. This key must be the same on the external
accounting server and the Prestige.
Click Back to go to the main wireless LAN setup screen.
Click Apply to save these settings back to the Prestige.
Click Cancel to begin configuring this screen again.
Prestige 660W/HW Series User's Guide
DESCRIPTION
6-25