Table of Contents
Advertisement
Prestige 660W/HW Series User's Guide
Step 2.
Fill in the required fields. Refer to the table shown next for more information about these fields.
FIELD
System Name
Choose a descriptive name for identification purposes. This name can
be up to 30 alphanumeric characters long. Spaces are not allowed, but
dashes "-" and underscores "_" are accepted.
Location (optional)
Enter the geographic location (up to 31 characters) of your Prestige.
Contact Person's
Enter the name (up to 30 characters) of the person in charge of this
Name (optional)
Prestige.
Domain Name
Enter the domain name (if you know it) here. If you leave this field blank,
the ISP may assign a domain name via DHCP. You can go to menu 24.8
and type "sys domainname" to see the current domain name used by
your gateway.
If you want to clear this field just press the [SPACE BAR]. The domain
name entered by you is given priority over the ISP assigned domain
name.
Edit Dynamic DNS
Press the [SPACE BAR] to select Yes or No (default). Select Yes to
configure Menu 1.1 — Configure Dynamic DNS (discussed next).
Route IP
Set this field to Yes to enable or No to disable IP routing. You must
enable IP routing for Internet access.
Bridge
Turn on/off bridging for protocols not supported (for example, SNA) or not
turned on in the previous Route IP field. Select Yes to turn bridging on;
select No to turn bridging off.
22-2
Menu 1 - General Setup
System Name= ?
Location=
Contact Person's Name=
Domain Name=
Edit Dynamic DNS= No
Route IP= Yes
Bridge= No
Press ENTER to Confirm or ESC to Cancel:
Figure 22-1 Menu 1 General Setup
Table 22-1 Menu 1 General Setup
DESCRIPTION
EXAMPLE
MyHouse
JohnDoe
zyxel.com.tw
No
Yes
No
Menu 1 General Setup
Advertisement
Chapters
Table of Contents
