Wizard Setup - ZyXEL Communications Prestige 660W Series User Manual

LINK
Schedule
Trusted
Remote
Management
UPnP
Logs Log Settings
View Log
Maintenance
System Status
DHCP Table
Wireless LAN Association List
Diagnostic General
DSL Line
Firmware
LOGOUT
2.5

Wizard Setup

Please see your Quick Start Guide for information on configuring the wizard screens.
Wizard Setup
Table 2-1 Web Configurator Screens Summary
SUB-LINK
Use this screen to set the days and times for the Prestige to perform
content filtering.
Use this screen to exclude a range of users on the LAN from content
filtering on your Prestige.
Use this screen to configure through which interface(s) and from which
IP address(es) users can use Telnet/FTP/Web to manage the
Prestige.
Use this screen to enable UPnP on the Prestige.
Use this screen to change your Prestige's log settings.
Use this screen to view the logs for the categories that you selected.
This screen contains administrative and system-related information.
This screen displays DHCP (Dynamic Host Configuration Protocol)
related information and is READ-ONLY.
This screen displays the MAC address(es) of the wireless stations that
are currently logged in to the network.
These screens display information to help you identify problems with
the Prestige general connection.
These screens display information to help you identify problems with
the DSL line.
Use this screen to upload firmware to your Prestige
Click this label to exit the web configurator.
Prestige 660W/HW Series User's Guide
FUNCTION
2-3