Figure 35-1 Menu 24 System Maintenance; Chapter 35 System Information And Diagnosis; System Status - ZyXEL Communications Prestige 660W Series User Manual

System Information and Diagnosis
This chapter covers the information and diagnostic tools in SMT menus 24.1 to 24.4.
These tools include updates on system status, port status, log and trace capabilities and upgrades for the
system software. This chapter describes how to use these tools in detail.
Type 24 in the main menu to open Menu 24

35.1 System Status

The first selection, System Status gives you information on the status and statistics of the ports, as shown
next. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you information
on your ADSL telephone line status, number of packets sent and received.
To get to System Status, type 24 to go to Menu 24 — System Maintenance. From this menu, type 1.
System Status. There are two commands in Menu 24.1 — System Maintenance — Status. Entering 1
resets the counters; [ESC] takes you back to the previous screen.
The following table describes the fields present in Menu 24.1 — System Maintenance — Status which are
read-only and meant for diagnostic purposes.
System Information and Diagnosis
System Maintenance, as shown in the following figure.
–
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management
Enter Menu Selection Number:

Figure 35-1 Menu 24 System Maintenance

Prestige 660W/HW Series User's Guide
Chapter 35
35-1