ZyXEL Communications Prestige 660W Series User Manual page 102

Prestige 660W/HW Series User's Guide
LABEL
Maximum Burst Size
Login Information
Service Name
User Name
Password
IP Address
Connection
(PPPoA and PPPoE
encapsulation only)
Nailed-Up Connection Select Nailed-Up Connection when you want your connection up all the time. The
Connect on Demand Select Connect on Demand when you don't want the connection up all the time and
Max Idle Timeout Specify an idle time-out in the Max Idle Timeout field when you select Connect on
PPPoE Pass Through This field is available when you select PPPoE encapsulation.
7-8
Table 7-1 WAN Setup
Maximum Burst Size (MBS) refers to the maximum number of cells that can be sent at
the peak rate. Type the MBS, which is less than 65535.
(PPPoA and PPPoE encapsulation only)
(PPPoE only) Type the name of your PPPoE service here.
Enter the user name exactly as your ISP assigned. If assigned a name in the form
user@domain where domain identifies a service name, then enter both components
exactly as given.
Enter the password associated with the user name above.
This option is available if you select Routing in the Mode field.
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet. The
Single User Account feature can be used with either a dynamic or static IP address.
Select Obtain an IP Address Automatically if you have a dynamic IP address;
otherwise select Static IP Address and type your ISP assigned IP address in the IP
Address field below.
The schedule rule(s) in SMT menu 26 have priority over your Connection settings.
Prestige will try to bring up the connection automatically if it is disconnected.
specify an idle time-out in the Max Idle Timeout field.
Demand. The default setting is 0, which means the Internet session will not timeout.
DESCRIPTION
WAN Setup