Prestige 660W/HW Series User's Guide
The following table describes the label in this screen.
LABEL
Wireless Port
To control wireless stations access to the wired network, select a control method from
Control
the drop-down list box. Choose from No Access Allowed, No Authentication
Required and Authentication Required.
No Access Allowed blocks all wireless stations access to the wired network.
No Authentication Required allows all wireless stations access to the wired network
without entering usernames and passwords. This is the default setting.
Authentication Required means that all wireless stations have to enter usernames and
passwords before access to the wired network is allowed.
Select Authentication Required to configure Key Management Protocol and other
related fields.
Back
Click Back to go to the main wireless LAN setup screen.
Apply
Click Apply to save your changes back to the Prestige.
Cancel
Click Cancel to begin configuring this screen afresh.
Authentication Required: 802.1x
Select Authentication Required in the Wireless Port Control field and 802.1x in the Key Management
Protocol field to display the next screen.
6-16
Figure 6-8 Wireless LAN: 802.1x/WPA
Table 6-4 Wireless LAN: 802.1x/WPA
DESCRIPTION
Wireless LAN Setup