Authentication Required: Wpa-Psk; Figure 29 Wireless Lan: 802.1X/Wpa:wpa-Psk; Table 18 Wireless Lan: 802.1X/Wpa: Wpa-Psk - ZyXEL Communications P-660H-T Series User Manual

5.7.4 Authentication Required: WPA-PSK

Select Authentication Required in the Wireless Port Control field and WPA-PSK in the
Key Management Protocol field to display the next screen.
See Section 5.6 on page 77

Figure 29 Wireless LAN: 802.1x/WPA:WPA-PSK

The following table describes the labels not previously discussed.

Table 18 Wireless LAN: 802.1x/WPA: WPA-PSK

LABEL
Key Management
Protocol
Pre-Shared Key
WPA Mixed Mode
Chapter 5 Wireless LAN
for more information.
DESCRIPTION
Choose WPA-PSK in this field.
The encryption mechanisms used for WPA and WPA-PSK are the same. The
only difference between the two is that WPA-PSK uses a simple common
password, instead of user-specific credentials.
Type a pre-shared key from 8 to 63 printable characters (including spaces;
alphabetic characters are case-sensitive).
The Prestige can operate in WPA Mixed Mode, which supports both clients
running WPA and clients running dynamic WEP key exchange with 802.1x in the
same Wi-Fi network.
Select the check box to activate WPA mixed mode. Otherwise, clear the check
box and configure the Group Data Privacy field.
P-660H/HW-T Series User' Guide
84