Data Encryption With Wep; Configuring Wireless Lan - ZyXEL Communications Prestige 660W Series User Manual

Prestige 660W/HW Series User's Guide
Use the Prestige web configurator to configurator to set up your wireless LAN security settings. Refer to the
chapter on using the Prestige web configurator to see how to access the web configurator.
6.3

Data Encryption with WEP

WEP encryption scrambles the data transmitted between the wireless stations and the access points to keep
network communications private. It encrypts unicast and multicast communications in a network. Both the
wireless stations and the access points must use the same WEP key for data encryption and decryption.
Your Prestige allows you to configure up to four 64-bit, 128-bit or 256-bit WEP keys but only one key can be
enabled at any one time.
In order to configure and enable WEP encryption; click Wireless LAN and Wireless to the display the
Wireless screen.
6.4

Configuring Wireless LAN

If you are configuring the Prestige from a computer connected to the wireless LAN
and you change the Prestige's ESSID or WEP settings, you will lose your wireless
connection when you press Apply to confirm. You must then change the wireless
settings of your computer to match the Prestige's new settings.
Click Wireless LAN, Wireless to open the Wireless screen.
6-4 Wireless LAN Setup