13.7.1 Factors Influencing Choices for Timeout Values
The factors influencing choices for timeout values are the same as the factors influencing choices for
threshold values – see section 12.3.2. Click Timeout for either Local Network to Internet Set or Internet
to Local Network Set.
The following table describes the labels in this screen.
LABEL
TCP Timeout Values
Connection Timeout
FIN-Wait Timeout
Idle Timeout
UDP Idle Timeout
Creating Custom Rules
Figure 13-6 Timeout
Table 13-5 Timeout
Type the number of seconds (default 30) for the Prestige to wait for a TCP
session to reach the established state before dropping the session.
Type the number of seconds (default 60) for a TCP session to remain open after
the firewall detects a FIN-exchange (indicating the end of the TCP session).
Type the number of seconds (default 3600) for an inactive TCP connection to
remain open before the Prestige considers the connection closed.
Type the number of seconds (default 60) for an inactive UDP connection to
remain open before the Prestige considers the connection closed.
Prestige 660W/HW series User's Guide
DESCRIPTION
13-13