Table of Contents
Advertisement
TROUBLESHOOTING
•
Tuner
FM stereo reception is
The characteristics of FM stereo
Check the antenna connections.
22
noisy.
broadcasts may cause this problem
when the transmitter is too far away or
Try using a high-quality directional FM
the antenna input is poor.
antenna.
Use the manual tuning method.
42
There is distortion, and
There is multi-path interference.
Adjust the antenna position to eliminate
clear reception cannot
multi-path interference.
FM
be obtained even with a
good FM antenna.
The desired station
The signal is too weak.
Use a high-quality directional FM antenna.
cannotbetuned~to
with the automatic
Use the manual tuning method.
42
tuning method.
Previously preset
This unit has been disconnected for a
Set preset stations
43,44
stations can no longer
long period.
be tuned into.
The desired station
The signal is weak or the antenna
Tighten the AM loop antenna connections
cannot be tuned into
connections are loose.
and orient it for the best reception.
with the automatic
tuning method.
Use the manual tuning method.
42
AM
There are continuous
Noises result from lightning,
Use an outdoor antenna and a ground wire.
crackling and hissing
fluorescent lamps, motors, thermostats
This will help somewhat, but it is difficult to
noises.
and other electrical equipment.
eliminate all noise.
There are buzzing and
A TV set is being used nearby.
Move this unit away from the TV set.
whining noises.
•
XM Satellite Radio
If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel
display. In this case, read the cause and follow the corresponding remedies.
CHECK
R~·~TEt·~~·~p'
t·,IO S I
13~·mL
LOHDlt·H3
The XM Connect-and-Play digital antenna
is not connected to the XM jack of this
unit or does not work properly.
The XM user encryption code is being
updated.
The signal is too weak.
It takes longer than four seconds for audio
or text data to be decoded.
Check the XM Connect-and-Play digital antenna
accessory connections and orient it for the best
reception level.
Wait until the encryption code is updated.
Check the XM Connect-and-Play digital antenna
accessory connections and orient it for the best
reception level.
Wait until the decoding process has finished.
48
48
OFF HIP
The XM Satellite Radio channel you
selected is not currently broadcasting any
signals.
The Channel Station ID (SID) is no longer
available.
No artist name or song title is available.
Check the channel number again or select another
XM Satellite Radio channel.
----------_._-------------------------_--.-._-
_.
----.---..--
.......................
<CHT>
88
No channels are available for the selected
category.
Select another channel category by pressing
CATEGORY on the front panel (or A-E/CAT.
</ >
on
the remote control) repeatedly.
53
Advertisement
Table of Contents
