Basic Setup - Yamaha HTR-5935 Owner's Manual

BASIC SETUP
The "BASIC SETUP" feature is a useful way to set up your system quickly and with minimal effort.
• Make sure you disconnect your headphones from this unit.
• If you wish to configure this unit manually using more precise adjustments, use the detailed parameters in "SOUND MENU"
(see page 75).
• Altering any parameters in "BASIC SETUP" resets all parameters manually adjusted in "SOUND MENU" (see page 75).
• Initial settings are indicated in bold under each parameter.
• Press RETURN on the remote control to return to the previous menu level.
1
2,12
3-11
1
Press AMP.
2
Press SET MENU.
"BASIC SETUP" appears in the front panel display.
3
Press ENTER to enter "BASIC SETUP".
PRESET/CH
The "ROOM" appears in the front panel display.
4
Press
<
I
>
to select the desired setting.
PRESET/CH
• • • • • • 11 • • • • • • • • • •
E •••
I:
EI••• E 5 •
5 •••:5···5 ••••
=
.E.
I ••••
. .
~::::!:::.
! tJ!"·=
• • • • • • • • • • • II
5 •••=::E EE·:·:::
51•• :•••::•••:: :::
Select the size of the room where you have installed
your speakers. In general, the room sizes are defined
as follows:
Choices: S, M, L
S (small) 16 x 13ft, 200ft
2
(4.8 x 4.0m, 20m
2 )
M (medium) 20 x 16ft, 300ft
2
(6.3 x 5.0m, 30m
2 )
L (large) 26 x 19ft, 450ft
2
(7.9 x 5.8m, 45m
2 )
25