Table of Contents
Advertisement
PLAYBACK
VOLUME
Rotate VOLUME on the front panel (or press
VOLUME +/- on the remote control) to adjust
the volume to the desired output level.
Press PROGRAM
<:J /
[:>-
buttons on the front
panel (or press one of the sound field
program selector buttons on the remote
control repeatedly) to select the desired
sound field program.
The name of the selected sound field program appears
in the front panel display.
See page 60 for details about sound field programs.
C:::~--d
9:'S
~
..-.>-
Front panel
7
Remote control
or
Front panel
5
Remote control
XMVOLUME
_I_/O·~~
+
V-AUX
DTV/CBL
~ovo
MD/CD-R
~
SP
A
or
+
..
6
Press TONE CONTROL on the front panel
repeatedly to select "TREBLE" or "BASS"
and then press BASSfTREBLE +/- buttons to
adjust the corresponding frequency
response level.
OVR
V-AUX
DTV/CBl
~ovo
SP
A
MD/CD-R
TUNER
XM VOLUME
-'-IO·~
'----_ _ @Kl_P_L
~"_<=.:::::
C.
:i~
..... i · ·· ].
~
currentlyl selected
sound field program
• Select "TREBLE" to adjust the high-frequency
response.
• Select "BASS" to adjust the low-frequency
response.
• Speaker and headphone adjustments are stored
independently.
• When "TC.BYPASS" is set to "AUTO" (see page 77), and
"BASS" and "TREBLE" are set to
a
dB, audio output
automatically bypasses the tone control circuitry of this
unit.
• If you increase or decrease the high-frequency or low-
frequency sound to an extreme level, the tonal quality of
the surround speakers may not match that of the front left
and right speakers.
• TONE CONTROL is not effective when the "DIRECT
STEREO" mode (see page 36) is selected or when
"MULTI CH INPUT" (see page 35) is selected as the
input source.
• To enjoy 6. I-channel compatible sources in surround, see
page 38 for details.
• Choose a sound field program based on your listening
preference, not merely on the name of the program.
• When you select an input source, this unit automatically
selects the last sound field program used with the
corresponding input source.
• Sound field programs cannot be selected when the
component connected to the MULTI CH INPUT jacks is
selected as the input source (see page 35).
• Sampling frequencies higher than 48 kHz (except for DTS
96/24 signals) are sampled down to 48 kHz and then sound
field programs are applied.
• To display information about the currently selected input
source in the front panel display, see page 36 for details.
29
Advertisement
Table of Contents
