Table of Contents
Advertisement
CONNECTIONS
The speaker layout below ShOlVS the standard ITU-R*
speaker setting. You can use it to enjoy CINEMA DSP and
multi-channel audio sources.
* lTU-R is the radio communication sector of the lTU
(International Telecommunication Union).
1.8
ill
(6
ft)
Front speakers (FL and FR)
The front speakers are used for the main source sound plus
effect sounds. Place these speakers at an equal distance
from the ideal listening position. The distance of each
speaker from each side of the video monitor should be the
same.
Center speaker (C)
The center speaker is for the center channel sounds
(dialog, vocals, etc.). If for some reason it is not practical
to use a center speaker, you can do without it. Best results,
however, are obtained with the full system. Place the
center speaker centrally between the front speakers and as
close to the monitor as possible, such as directly over or
under it.
Surround speakers (SL and SR)
The surround speakers are used for effect and surround
sounds. Place these speakers behind your listening
position, facing slightly inwards, about 1.8 m (6
ft)
above
the floor.
Subwoofer (SW)
The use of a subwoofer is effective not only for
reinforcing bass frequencies from any or all channels, but
also for hi-fi stereo reproduction of the LFE (low-
frequency effect) channel included in Dolby Digital and
DTS sources. The position of the subwoofer is not so
critical, because low bass sounds are not highly
directional. But it is better to place the subwoofer near the
front speakers. Tum it slightly toward the center of the
room to reduce wall reflections.
11
Advertisement
Table of Contents
