Getting Started - Yamaha HTR-5935 Owner's Manual

GETTING STARTED
Check that you received all of the!ollowing parts.
r
Remote control
AM loop antenna
oMaRa []
o
ocr
0 0
@]
[][J
E5
.U
G "
§[B[§)O
§)@]§)D
@YAMAHA
Batteries (2)
(AA, R6, UM-3)
Indoor FM antenna
1
1
Press the ; part and slide the battery
compartment cover off.
2
Insert the two supplied batteries (AA, R06,
UM-3) according to the polarity markings
(+ and -) on the inside of the battery
compartment.
3
Slide the cover back until it snaps into place.
• Change all of the batteries if you notice a decrease in the
operation range of the remote control.
e
Do not use an old battery together with a new one.
• Do not use different types of batteries (such as alkaline and
manganese batteries) together. Read the packaging carefully as
these different types of batteries may have the same shape and
color.
• If the batteries have leaked, dispose of them immediately. Avoid
touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before
installing new batteries.
• Do not throwaway batteries with general house waste; dispose
of them correctly in accordance with your local regulations.
• If the remote control is without batteries for more than
2 minutes, or if exhausted batteries remain in the remote
control, the contents of the memory may be cleared. When the
memory is cleared, insert new batteries, set up the remote
control code and program any acquired functions that may have
been cleared.
3