Table of Contents
Advertisement
SET MENU
•
Zone set D) f'iUL TI
ZO~'~E
Use this feature to specify the location of speakers
connected to the SPEAKERS B terminals of this unit.
Speaker B setting
SF'
E:
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices: FRONT, ZONE B
• Select "FRONT" to tum on or off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main zone.
• Select "ZONE B"
if
the speakers connected to the
SPEAKERS B terminals are set in another zone.
If
SPEAKERS A is turned off and SPEAKERS B is
turned on, all the speakers in the main zone are muted
and this unit outputs sound at the SPEAKERS B
terminals only.
• If you connect headphones to the PHONES jack of this unit, the
sound is output from both headphones and the SPEAKERS B
terminals when "SP B" is set to "ZONE B".
• If a DSP program is selected when "SP B" is set to "ZONE B",
this unit automatically enters the Virtual CINEMA DSP mode
(see page 39).
•
XM Radio setting E:n·::t'1
F.~RDIO
SET
XM Radio antenna
::· : :t' 1 Rt·n.
Use this feature to check the current reception level of the
XM Connect-and-Play digital antenna accessory
connected to the XM jack of this unit (see page 48). For
the best reception, orient the XM Connect-and-Play digital
antenna accessory so that a value of 60% or more is
displayed here.
Display status: NONE, 0 to 100%
• "NONE" is displayed if the XM Connect-and-Play digital antenna
accessory is not connected to this unit. In this case, check the
antenna connections (see page 48).
• The"
XM
ANT."
parameter cannot be adjusted by using the
remote control. Instead, you need to adjust the orientation of the
XM Connect-and-Play digital antenna accessory connected to
the XM jack of this unit for a better percentage of the reception
level.
XM Radio information display scroll
5CPOLL
Use this feature to set whether to display the XM Satellite
Radio information in the front panel display in continuous
manner pr by 14 alphanumeric characters at once (see
page 57).
Choices: CONT, ONCE
• Select "CONT" to display the XM Satellite Radio
information in the front panel display in a continuous
manner.
• Select "ONCE" to display the XM Satellite Radio
information in the front panel display by 14
alphanumeric characters at once.
80
Advertisement
Table of Contents
