Table of Contents
Advertisement
SOUND FIELD PROGRAMS
You can enjoy good quality sound with the initial factory
settings. Although you do not have to change the initial
factory settings, you can change some of the parameters to
better suit the input source or your listening room.
• Use the "PARAM. INI" feature in "OPTION MENU" to
initialize the parameters of each sound field program within a
sound field program group (see page 79).
• You cannot change the sound field parameter values when
"MEMORY GUARD" in "OPTION MENU" is set to "ON"
(see page 79). If you want to change the sound field parameter
values, set "MEMORY GUARD" to "OFF".
2
Press one of the sound field program
selector buttons repeatedly to select the
desired sound field program you want to
adjust.
3
Press
A
I
v
to select the desired sound field
parameter and then
<
I
>
to change the
selected sound field parameter value.
• Press> to increase the value.
• Press
<
to decrease the value.
,"
~<j)-:'
• For details about the function and control range of each sound
field parameter, see page 63.
• Repeat steps 2 and 3 as necessary to change other sound field
program parameter settings.
• If
you press and hold
</>
to change the sound field parameter
value, the initial factory settings are shown momentarily in the
front panel display.
+
PRESET/CH
1
2
2
1
Press AMP on the remote control.
62
Advertisement
Table of Contents
