Table of Contents
Advertisement
CONNECTION TO THE RECEIVER
• Check to make sure that the power has been turned off before making connections.
• Make sure that the
+
and - polarity markings of the speaker cables are observed and set correctly. If these
cables are reversed, the sound will be unnatural and lack bass.
• Do not let the bare wires touch each other as this could damage the subwoofer, receiver, or both .
When using a banana plug:
o
Tighten the terminal knob.
8
Simply insert the banana plug
into the terminal.
.
-
Good
No Good
3/8"
(10mm)
SUB WOOFER
USEONLYTHESUBWOOFER
PROVIDED WITH THIS SYSTEM
How to connect:
CD
Loosen the knob.
(1)
Remove the insulation coating at the extremity of each speaker cable by twisting the coating off.
®
Insert the bare wire.
@ Tighten the knob and secure the cable.
®
Test the firmness of the connection by pulling lightly on the cable at the terminal.
SPECIFICATIONS
*
Specifications subject to change without notice
due to product improvements.
Type
Speaker
Frequency Range
Impedance
Nominal Input
Maximum Input
Sensitivity (dB/2.83v. 1m)
Bass Reflex
10" cone woofer
25 Hz - 5 kHz
6 ohms
40W
130W
88 dB
Dimension (H x W x D)
Weight
Magnetic Shielding
13"
x
12"
x
12-7/8"
(330 x 305 x 325 mm)
16.8 Ibs (7.6 kg)
Yes
• YAMAHA
YAMAHA ELECTRONICS CORPORATION, USA
6660 ORANGETHORPE AVE.,
BUENA PARK, CA 90620
http://www.yamaha.com/yec
Phone: 1-800-492-6242
PIN
430043
Printed in China
Advertisement
Table of Contents
