Table of Contents
Advertisement
FM
You can use the automatic preset tuning feature to store
FM stations with strong signals up to 40 (AI to E8: 8
preset station numbers in each of the 5 preset station
groups) of those stations in order. You can then recall any
preset station easily by selecting,the preset station number.
3
Press and hold MEMORY (MAN'L1AUTO FM)
for more than 3 seconds.
The preset station number and the MEMORY and
AUTO indicators flash. After approximately 5
seconds, automatic presetting starts from the current
frequency and proceeds toward the higher
frequencies.
Flash
MEMORY
MAN~
+
SP
A
".:1:::1::;""::
F"!":"!
Flashes
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
,I,
~<i>-:'
You can specify the preset number from which this unit
stores FM stations and/or begins tuning toward lower
frequencies. For details, see "Automatic preset tuning
options" on page 44.
3
1
2
INPUT
3
Rotate the INPUT selector to select "TUNER"
as the input source.
1
2
Front panel
Press FM/AM to select "FM" as the reception
band.
"FM" appears in the front panel display.
..
e
Any stored station data existing under a preset station
number is cleared when you store a new station under the
same preset station number.
• If the number of received stations does not reach 40 (E8),
automatic preset tuning automatically stops after
searching for all the available stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station
you want to store is weak in signal strength, tune into it
manually and store it as described in "Manual preset
tuning".
43
Advertisement
Table of Contents
